"1L" Series Filters
 Low Cost, High Quality, Low Pressure

1L Gas or Liquid Filter Vessels
 

"1L" SERIES FEATURES

  • 1, 2, 3 or 4 Cartridge Models
  • 200 PSI Working Pressure
  • T-Handle Closure Nut
  • Buna Shell Gasket
  • Cast Iron/Carbon or Stainless Steel Construction Available
  • One Piece Body Constuction
  • 1" Internal Pipe Thread Connection
  • 1/8" Internal Pipe Thread Drain Standard
  • Gases or Fluid Filtration
  • Water Flow Rates to 24 GPM
  • Glycol Flow Rates to 15 GPM
GENERAL INFORMATION
The Nowata Filtration "1L" Series filters are available in 1, 2, 3 and 4 cartridge models. These low cost, high quality filters are designed for industrial and commercial service. The filters are ideal for many low pressure glycol and amine applications. The head mounts directly in the flow line. The filter may be mounted in any position. Fluid enters one side of the head, marked "IN", and is channeled to the area around the cartridges. The fluid or gas passes through the cartridges into the center and out the other side of the head, marked "OUT". The single piece body is sealed to the head by a fixed rigid center rod and T-handle closure nut. As the T-handle is tightened, the body and cartridge are firmly sealed against the head and gasket. The one piece body eliminates the dual gaskets required for competitive units. The T-handle, standard on the "1L" series, is an option on many other brands. Each model has, as standard, a plugged 1/8" internal pipe thread drain in the bottom of the body.

SPECIAL FEATURES
The following features offer special benefits at no extra cost:

  • Initial set of 25 Micron NP Series cartridges included.
  • One piece body eliminates the need for dual gaskets.
  • Standard T-handle eliminates the need for wrenches or tools.
  • 1" FNPT inlet and outlet connections allow maximum flow ratings at a low pressure drop.
  • Standard 1/8" FNPT body drain fitting allows draining or pressure relief.
     
     
     
     

    Home  •  Company Info  •  Email  •  Products

 



Copyright (c) NMW Inc.