|
PC SERIES CELLULOSE
CARTRIDGES
The PC Series Cartridges are designed for general
applications, including fresh and salt water, which
require fine micron filtration at a reasonable cost.
Maximum operating temperature 150°F
(66°C).
Typical
Applications
Include:
|
|
PCP SERIES POLYPROPYLENE CARTRIDGES
The PCP Series Cartridges should be specified when
handling acids and other corrosive fluids that may
attack epoxy or phenolic binders. The polypropylene
media offers finer micron filtration and better removal
efficiencies than the PC cellulose series. Maximum
operating temperature 150°F
(66°C).
Typical
Applications Include:
-
Mild Acids
-
Electroplating
-
Film Processing
-
Completion Fluids
-
R.O. Pre-Filtration
-
Process Water
-
Fine Chemicals
-
Workover Fluids
|
|
PC SERIES FEATURES:
-
Pleated Cellulose media with Phenolic Resin Binder
-
PC1 cartridge media: Cellulose/Glass mixture
-
All support components Polypropylene
-
2-9/16" OD x 1-1/16" ID
-
Double Open End Style
-
Melt Blown Polypropylene Flat End seals
-
Nominal micron rating based on 99% (Beta 100)
filtration efficiency.
|
|
PCP SERIES FEATURES:
-
Pleated Polypropylene media
-
All support components Polypropylene
-
2-9/16" OD x 1-1/16" ID
-
Double Open End Style
-
Thermally bonded, no epoxy or glue
-
Nominal micron rating based on 99% (Beta 100)
filtration efficiency.
|
Available in either a cellulose or polypropylene
configuration, Nowata's Pleated Trapper cartridges provide
dependable filtration for a variety of fluids and gases. Each
configuration has specific advantages, matched to the particular
filtration in use. In the cellulose configuration, these cartridges
provide a rugged design for dependable, low-cost filtration. In
applications where higher removal efficiencies are needed, along
with enhanced chemical compatibility, the polypropylene media is
best. The PC Series cartridges are constructed of high quality
cellulose fibers, and the PCP Series cartridges are made of high
strength polypropylene.