The Nowata-ProGuard Filtration High Flow Vibrating Filter is designed for
particle size control when filtering fluids with high solids
concentration. The vibrating action of the unit causes a significant
reduction in bridging, caking and other physical problems that are
common when filtering paint, inks, paper slurries, and other fluids
with high solids.
316 Stainless Steel
Construction
Working Pressure to 200 PSI (14
Kg/cm2)
Vibrator Air Requirement: 6.5 SCFM
@ 20
PSI
316 Stainless Steel Filter
Media
Flow Rates to 135 GPM (511
L/min)
Multi-Tube Systems for Higher Flow Rates
are Available
TFE O-Ring Seals
Commonly Used in Industrial E-Coat Applications
(E-Coat also known as Electrocoat or Electrodeposition)
THE
E-COAT VIBRATING FILTER ELEMENT
Vibrating
elements keep all solids in suspension as they "bounce" off the
filter surface. Correct size particles eventually pass through the
media.
Unwanted
oversize particles cannot pass through the media. The result is a
clean, consistent, contaminant free fluid.
THE
PROBLEMS WITH BAG & CARTRIDGE
ELEMENTS
Since the
fibers in felted filter media are randomly distributed, they create
a wide range of opening sizes. This allows some of the larger,
unwanted particles to pass through. At the same time, many smaller,
desirable particles are also trapped.
As build-up
occurs on the felt surface, more and more smaller particles are
filtered, thus breaking down the entire filtration
process.
Interested in a Quote on this item?
Need more Information?
Use this button to send an
Email to our Technical Sales Department
with your Questions and
Specs.
View the technical specifications
of the High Flow Vibrating Filter
on the Pdf, "Filtration Through Vibration" brochure, link below.